In the 75 Flow series for interior sliding doors has one important element: FLOW SLIDING TRACK. Previously, Helaform offered separate sliding door systems with cover plates using its own p-track, but thanks to fine product development, the renewed FLOW sliding track has been designed to fit both the straight and curved cover plate into the Flow track, providing access to all 75 Flow accessories. As usual, the 75 Flow series is sold as separate parts, which allow the customer to assemble a sliding door system that suits for his purposes or as a complete fittings sets.
Complete fittings sets
We offer three different complete fittings sets for 75 Flow. Without cover plate and with cover plates. These fittings sets include all the necessary parts for the installation of a single sliding door. Fittings sets are available in different track lengths, depending on the width of the sliding door opening.
FITTINGS SET WITH TRACK 75 FLOW is a great choice when you want to keep the track visible, embed it in the ceiling or if you want to make the cover plate / panel yourself, where the track mechanism is hidden.
The fittings set contains all the parts needed to install a single sliding door. The set also includes a Soft Close, which allows you to close the door slowly and smoothly without the door slamming shut. In addition, a Soft Stop door stop that stops the door by damping and clamping it so that the door does not bounce back. The length of the sliding track is 2.1 m, 2.4 m and 3 m.
COVER PLATE SET 75 FLOW, the appearance is finished as the set includes a Straight cover plate that hidden the front and sides of the track mechanism. The cover plate fits easily into the track without screws.
The fittings set contains all the parts needed to install a single sliding door and Straight cover plate and end caps. The length options of the sliding track is 2.1 m, 2.4 m and 3 m.
COVER PLATE SET 75 FLOW CURVED is the same set as the 75 Flow Cover Plate, but with a Curved Cover Plate. The curved cover plate also covers the top of the rail, forming a roof over the track mechanism, e.g. dust can be easily wiped off the cover plate.
The fittings set contains all the parts needed to install a single sliding door and Curved cover plate and end caps. The length options of the sliding track is 2.1 m, 2.4 m and 3 m.
Accessories
75 Flow offers a variety of accessories for interior doors that add sliding door comfort and a finished look. After choosing the right system (with or without cover plate) according to the environment, application and need, you can then choose what functionality you want to use. For example, the use of the Soft close is popular in service and day care centers, which provides additional safety when sliding the door. You can also install accessories afterwards.
Soft Close 
- Closes the door slowly and effortlessly with out slamming the door shut.
- Can be installed to the closing or opening end..
- Is installed completely inside the track.
- Available in two different versions: blue for 75 kg weight capacity and black for 100 kg weight capacity.
Soft Stop 
- STOPS softly the doors movement.
- Keeps the door in an open position.
- Can be installed to the closing or opening end.
- Is installed completely inside the track.
LHP -Low headroom plate
- Minimize the cap between track and the door.
- Goes into the slot milled (machined) at the top of the door.
- Capacity 100 kg / pair.
- Door thickness can be 26-62 mm
- Plate adjustment margin 8 mm.